產品簡介

優良的接地系統是電力、電信、電氣設備安全可靠運行的重要保證。接地電阻大小是接地系統品質優劣的評判依據。、快速、簡捷、可靠的接地電阻測量方法，已成為防雷接地領域內技術進步的迫切需要。NASJX雙鉗接地電阻測試儀適用于電信、電力、氣象、機房、電力配電線路、鐵塔輸電線路、加油站、工廠接地網、避雷針等。

NASJX雙鉗接地電阻測試儀除了具有傳統打輔助地極測接地電阻的功能外，還具備了無輔助地極測量的功能，改變了測試接地電阻傳統的測量原理和手段：采用雙鉗口非接觸測量技術無需打輔助地極，也無需將接地體與負載隔離，實現了在線測量。在單點接地系統、干擾性強等條件下，可以采用打輔助地極的測量方式進行測量。

產品別名

雙鉗接地電阻測試儀，多功能雙鉗接地電阻測試儀，多功能接地電阻測試儀，雙鉗口接地電阻測試儀，鉗形接地電阻測試儀，接地電阻，接地表，地阻儀，接地電阻儀，接地電阻測量儀，數字式接地電阻測試儀，數字接地電阻測試儀，雙鉗式接地電阻測試儀，鉗式數字接地電阻測試儀，雙鉗數字接地電阻測試儀，鉗式接地電阻測試儀

產品特性 

1．雙鉗法/地樁法雙重測量方式：

適合任意接地場所，多點或單點接地，都可正常測試；

2．抗干擾能力強：

自產生高頻電流，從而過濾市電中50Hz、100Hz等諧波干擾電流，即使在500KV變電站環境下，也能測量；

3．測量范圍廣、分辨率高：

量程從0.01Ω～200Ω，分辨率0.01Ω，對0.7Ω以下接地電阻，也能準確測量；

4．大鉗口設計：

鉗口直徑50mm（標準配置），滿足用扁鐵/鋼作接地引線的情況，特殊鉗口尺寸可按客戶要求定制；

5．大容量數據存儲：可儲存200組測量數據；

6．操作簡單，單人作業：

中英文操作界面、體積小、重量輕，防爆便攜箱，野外測量攜帶方便。

                                                              產品參數

接地電阻測量范圍	雙鉗法	0.01Ω～200Ω
	地樁法
準 確 度	雙鉗法	±3%±2個字
	地樁法	±2%±2個字
*小分辨率		0.01Ω
鉗口尺寸		Φ50mm
存儲容量		200組數據
工作溫度		0℃～ + 50℃
供電方式		8節5號鎳氫充電電池或普通AA電池
重    量		0.8KG(含電池)
尺    寸		265mm×130mm×65mm

 

Product introduction 

Excellent grounding system is very improtant to ensure the power, telecommunications, electrical equipment safe and reliable operation. Grounding resistance grounding system size is d on the quality of the merits of the judgment. Accurate, fast, simple and reliable grounding resistance measurement method, the area has become a lightning protection and grounding technological advances are urgently needed. NASJX double clamp earth resistance tester for telecommunications, electricity, weather, room, power distribution lines, tower transmission lines, gas stations, factories grounding, lightning and so on.

NASJX has traditional fight auxiliary earth ground resistance measurement functions, also has no auxiliary measuring the unique features of the earth, changing the traditional testing ground resistance measurement principle and means: Double clamp mouth non-contact measurement technology eliminates the need to fight auxiliary earth, and without the grounding body and load isolation, to achieve an online survey. In the single-point grounding system, strong interference and other conditions, can be used to fight the auxiliary earth electrode measurement measurement.

Also called name

Earth resistance tester, dual-clamp resistance tester,Double Clamp Ground Resistance Tester, multifunction double clamp earth resistance tester, multi-ground resistance tester, double jaw Ground Resistance Tester, Clamp Ground Resistance Tester, Ground Resistance, Ground sheet, ground resistance meter, earth resistance meter, earth resistance meter, digital ground resistance tester, digital ground resistance tester, dual clamp ground Resistance Tester, digital ground Resistance Tester clamp, double Clamp digital ground Resistance Tester, clamp-on ground Resistance Tester

The Characteristics of the products 

1. Dual clamp/ ground anchor two methods:

  applies any ground site,  single or multiple point grounding.

2. Strong anti-jamming ability

3. Wide measurement range, high resolution

  range: 0.01Ω～200Ω, resolution: 0.01Ω，

4. Big jaw design:

  diameter :50mm (standard), special size according customers’ requirements.

5. Large-capacity data storage:200 groups

6. Easy to operate:

  small in volume, light in weight, portable explosion proof case, convenient to field test to carry.

The parameters of the products

1. Earth resistance measurement range:

  dual clamp: 0.01Ω~200Ω

  ground anchor: 0.01Ω～200Ω

2. Error:

  dual clamp: ±3%±2 d

  ground anchor: ±2%±2 d

3. Minimum resolution: 0.01Ω

4. Jaw size: Φ50mm 

5. Storage Capacity: 200 groups

6. Temperature: 0℃ ~ + 50℃

7. Power supply: eight Ni-MH rechargeable batteries or common AA battery

8. Weight: 0.8KG (includes the battery)

9. Dimension: 265mmx130mmx65mm

 

Product information

1, jaw and host as a whole set. To avoid measurement errors, do not use the jaw of NASJX Double Clamp Ground Resistance Tester hosts for other host.

2, must keep iron core contact surfaces of the jaw clean, or else contaminated instrument jaw will reduce measurement accuracy.

3, keep the jaws closed well during the test to avoid stuck phenomenon.