日本愛德萬直流電源ADCMT6242產(chǎn)品特點(diǎn)
各種各樣的生成和測量功能
電壓：0?±6V電流：0?±5A
高分辨率的產(chǎn)生和測量分辨率
發(fā)生分辨率：10μV/1nA的測量分辨率：1μV/100pA減
基本精度±一代，測量0.02％
總線小脈沖寬度為50μs，分辨率為1μs的脈沖測量
配備了新的功能，坡線性掃描
可吸收雙極性輸出
配備GPIB/ USB作為外部接口

DC Voltage Current Source/Monitor Key Facts
6242 is DC voltage and current source/monitor with high-performance features including source resolution of 4? digits, measuring resolution of 5? digits, and a basic accuracy of 0.02%. It supplies/measures 0 to ±6 V / 0 to ±5 A and enables extensive pulse generation and measurement functions including sweep and pulsed sweep. 6242 can generate pulse widths down to 50μs and can measure with a resolution down to 1μV/100pA. So this product can be used for a wide range of applications, e.g. as a power source for evaluations in research and development of semiconductors and other electronic components, or as a power source for a production line characteristic test system. 6242 is very well suited for the evaluation of solar cell characteristics. At the same time, the individual HI/LO limiter setting function demonstrates its power in evaluation of batteries and power source ICs. Its suspend function enables the selection of the optimal OFF state depending on the specific requirement of each application. 6242 is equipped with GPIB and USB interface in standard.

，F(xiàn)eatures & Benefits
0 to ±6 V / 0 to ±5 A
4-quadrant supply with positive and negative output voltages, even useable as DC sink
applicable as voltage source or as real current source
source and measurement with a basic accuracy of ±0.02%
high resolution in source (10 μV/1 nA) and measurement (1 μV/100 pA)
fast sample and waveform buffer (8000 data)
pulse generation and measurement with minimum pulse width of 50 μs
minimum pulse period: 500 μs
lowest ripple & noise
DC and pulse sweep with fixed/linear/random and two-slope linear functions
fast generation mode switching
individual settings of HI and LO limits
suspend function with different output OFF states (STBY/ HiZ / LoZ)
settable suspend voltage to prevent battery discharge
R measurement in CV or in CC mode
precise timing at pulse generation and definition of the measurement window
comfortable trigger and synchronisation capabilities of multiple units and with other instruments
programmable comparator limits
scaling calculation of measurement results
automatic “Null Calculation” for cancelling of offset values
parallel and serial operation of several units possible
settling time 30 μs (in FAST response mode)
additional S&H mode for short pulse measurements
GPIB and USB interfaces